Research and Application of Stainless Steel in Building Steel Structure

Ganping Shu; Yaohua Wu; Shenggang Fan; Baofeng Zheng

doi:10.13206/j.gjgS24070920

Volume 39 Issue 10

Oct. 2024

Turn off MathJax

Article Contents

Article Navigation > STEEL CONSTRUCTION(Chinese & English) > 2024 > 39(10): 105-110

Ganping Shu, Yaohua Wu, Shenggang Fan, Baofeng Zheng. Research and Application of Stainless Steel in Building Steel Structure[J]. STEEL CONSTRUCTION(Chinese & English), 2024, 39(10): 105-110. doi: 10.13206/j.gjgS24070920

Citation:

Ganping Shu, Yaohua Wu, Shenggang Fan, Baofeng Zheng. Research and Application of Stainless Steel in Building Steel Structure[J]. STEEL CONSTRUCTION(Chinese & English), 2024, 39(10): 105-110. doi: 10.13206/j.gjgS24070920

Citation:

PDF( 5761 KB)

Research and Application of Stainless Steel in Building Steel Structure

doi: 10.13206/j.gjgS24070920

1. School of Civil Engineering, Southeast University, Nanjing 211189, China;
2. Central Research Institute of Building and Construction Co., Ltd., MCC Group, Beijing 100088, China

Received Date: 2024-07-09
Available Online: 2024-11-06

Abstract

Abstract

With excellent corrosion resistance and good mechanical properties compared to traditional low-carbon steels, stainless steel is a high-performance green building material and an important material solution to address the safety and durability of engineered structures in demanding environments. This paper provides brief information on the types, characteristics and typical applications of stainless steel materials and products in construction structures. The study shows that in the construction industry in recent years, the growing demand for stainless steel, more and more companies are committed to the development of economic, high-strength stainless steel for construction, the application of stainless steel in the construction structure is gradually expanding from the enclosure to the load-carrying structure. The current research status of stainless steel material properties, members, connecting nodes, structure, seismic and fire resistance is summarised by sorting out the current research status of stainless steel at China and overseas. At present, the research on traditional stainless steel materials and members tends to be perfect, the research on new stainless steel materials and components of the combination of the research is gradually emerging, and on the stainless steel structure of the connection properties and structural system level of the research has just begun, need to be in-depth study. Subsequently sorted out Chinese stainless steel materials and products processing, structural design and quality acceptance of the normative standard system, and finally discussed the future direction of research and development of stainless steel structure in China.
- stainless steel,
- building structures,
- current research status,
- standard systems

FullText(HTML)

References(30)

References

[1]	吴耀华. 不锈钢结构的材料选用及防腐蚀设计[J]. 工业建筑, 2015, 45(12): 7-12.
[2]	王来, 刘锡良. 不锈钢焊接空心球网架的研究[J]. 钢结构, 1999,14(1): 32-35.
[3]	朱浩川, 姚谏. 不锈钢材料的应力-应变模型[J]. 空间结构, 2011, 17(1): 62-69.
[4]	王元清, 常婷, 石永久, 等. 奥氏体不锈钢S31608的本构关系试验[J]. 清华大学学报, 2013, 53(9): 1231-1234 , 1240.
[5]	郑宝锋, 舒赣平, 沈晓明. 不锈钢材料常温力学性能试验研究[J]. 钢结构, 2011, 26(5):1-6 ,55.
[6]	Nip K, Gardner L, Davies C, et al. Extremely low cycle fatigue tests on structural carbon steel and stainless steel[J]. Journal of Constructional Steel Research, 2010,66: 96-110.
[7]	常笑, 杨璐, 王萌, 等. 循环荷载下奥氏体型和双相型不锈钢材料本构关系研究[J]. 工程力学, 2019, 36(5): 137-147.
[8]	Zhou Y, Chouery K, Xie J. Full-range plasticity of novel high-performance low-cost stainless steel QN1803[J]. Steel and Composite Structures, 2020, 35(6): 739-752.
[9]	范圣刚, 孙文隽, 桂鹤阳, 等. 轴心受压 H 形截面不锈钢柱抗火性能分析[J]. 工程力学, 2016, 33(6): 154-162.
[10]	Liu M, Fan S, Ding R, et al. Experimental investigation on the fire resistance of restrained stainless steel H-section columns[J]. Journal of Constructional Steel Research, 2019,163, 105770.
[11]	Xing Z, Zhao O, Kucukler M, et al. Fire testing of austenitic stainless steel I-section beam-columns[J]. Thin-Walled Structures, 2021,164, 107916.
[12]	蒋一,程满浪,姜海洪,等. 高强度含N节Ni奥氏体不锈钢08Cr19Mn6Ni3Cu2N(QN1803)的显微组织及性能[J]. 金属学报, 2020, 56(4): 642-652.
[13]	班慧勇, 朱俊成, 施刚, 等. 不同复合比下不锈钢复合钢材循环本构模型研究[J]. 土木工程学报, 2019, 52(10): 67-74.
[14]	班慧勇, 梅镱潇, 石永久. 不锈钢复合钢材钢结构研究进展[J]. 工程力学, 2021, 38(6): 1-23.
[15]	舒赣平, 郑宝锋, 沈晓明. 冷成型不锈钢管轴心受压柱试验研究[J]. 建筑结构学报, 2013, 34(5): 87-95.
[16]	舒赣平, 郑宝锋, 范圣刚, 等. 不锈钢轴心受压柱弯曲屈曲承载力分析[J]. 建筑结构学报, 2013, 34(11): 116-122.
[17]	舒赣平, 郑宝锋, 沈晓明. 不锈钢轴心受压构件稳定承载能力计算方法研究[J]. 工业建筑, 2012, 42(5): 21-28.
[18]	Rasmussen K, Rondal J. Strength curves for metal columns[J]. Journal of Structural Engineering, 1997, 123(6): 721-728.
[19]	Gardner L. The continuous strength method[J]. Structures & Buildings, 2008, 161(SB3): 127-133.
[20]	姚健宇, 邓瑞婷, 郑宝锋, 等. 不锈钢与碳钢焊接接头力学性能研究[J]. 钢结构(中英文), 2023, 38(10): 25-31.
[21]	李志林, 杨璐, 崔瑶, 等. 焊接工艺对不锈钢角焊缝连接试件力学性能影响研究[J]. 工程力学, 2021, 38(2): 179-186 ,210.
[22]	吴耀华, 张志远, 纪洪广. 高强度螺栓连接中钢板孔壁承压强度试验研究[J]. 钢结构, 2015, 30(12): 28-31.
[23]	王嘉昌, 郑宝锋, 舒赣平, 等. 不锈钢高强度螺栓受力性能试验研究[J]. 建筑结构学报, 2021, 42(11): 195-202.
[24]	袁焕鑫, 胡松, 杜新喜, 等. 不锈钢T形件螺栓连接承载性能试验研究[J]. 工程力学, 2019, 36(2): 215-223.
[25]	郑宝锋, 顾悦言, 王嘉昌, 等. 不锈钢板摩擦面抗滑移系数试验研究[J]. 建筑结构学报, 2021, 42(12): 154-161.
[26]	郑宝锋, 吴步宸, 张奎, 等. 不锈钢圆管T形、Y形相贯节点支管受拉承载力研究[J]. 西安建筑科技大学学报(自然科学版), 2022, 54(4): 508-516.
[27]	袁焕鑫, 高焌栋, 杜新喜, 等. 不锈钢端板连接梁柱节点静力承载性能试验研究[J]. 建筑结构学报, 2021, 42(12): 125-132.
[28]	王嘉昌. 不锈钢框架结构节点的抗震性能理论与试验研究[D]. 南京: 东南大学, 2022.
[29]	张明宇. 不锈钢框架结构拟静力试验与抗震性能化设计方法研究[D]. 南京: 东南大学, 2022.
[30]	Ning K, Yang L, Ma Y, et al. Experimental study on seismic performance of stainless steel full-scale frames: global response[J]. Journal of Constructional Steel Research, 2024, 217, 108658.