Volume 39 Issue 5
May  2024
Turn off MathJax
Article Contents
Zhenming Chen, Ka Bian, Fei Gao, Junbo Chen, Meng Xiao. Anti-Slip Experimental Research on Aluminum-Based Metalized Faying Surfaces of Q690 High Strength Steel with Different Bolt Hole Types[J]. STEEL CONSTRUCTION(Chinese & English), 2024, 39(5): 8-16. doi: 10.13206/j.gjgS24050102
Citation: Zhenming Chen, Ka Bian, Fei Gao, Junbo Chen, Meng Xiao. Anti-Slip Experimental Research on Aluminum-Based Metalized Faying Surfaces of Q690 High Strength Steel with Different Bolt Hole Types[J]. STEEL CONSTRUCTION(Chinese & English), 2024, 39(5): 8-16. doi: 10.13206/j.gjgS24050102

Anti-Slip Experimental Research on Aluminum-Based Metalized Faying Surfaces of Q690 High Strength Steel with Different Bolt Hole Types

doi: 10.13206/j.gjgS24050102
  • Received Date: 2024-01-29
    Available Online: 2024-06-22
  • Publish Date: 2024-05-22
  • The application of high strength steels (HSS) in building structures can effectively reduce the consumption of structural steel and erection cost, lower the carbon footprints of building structures, and promote the high-quality development of the construction industry. As one of the most commonly used connection types in steel structures, the slip critical connection transfers the load through the friction forces between the faying surfaces of the connected plates, and is characterized by high rigidity and excellent performances against fatigue and vibrational loadings. So the slip critical connection is commonly used in bridges. In real projects, HSS slip critical connection faces the corrosion problems and low assembly accuracy in site construction. These problems can be solved by thermal spay of aluminum on connecting surfaces and hole reaming. Therefore, the anti-slip performance of HSS slip critical connections after thermal spay of aluminum and reaming has a crucial influence on the shear capacity of the connections. To investigate the anti-slip performance of aluminum-based metalized faying surfaces with high strength bolts of Q690 HSS with different bolt hole types, standard tests and pretension loss tests were carried out. Specimen surfaces were prepared by grit blasting and thermal spray of aluminum after grit blasting. Four bolt hole types were considered for metalized faying surface specimens, including standard holes, oversized holes, long slotted holes perpendicular and parallel to the loading direction, while only the standard hole was considered in the grit blasted group. When the specimens reached the slip load, failure occurred and significant slip was observed. The failure mode of the anti-slip specimens after grit blasting was the surface abrasion around bolt holes, while the failure modes of the anti-slip specimens after thermal spray of aluminum were the abrasion and peeling of coating around bolt holes. Test results indicated that the recommended values of anti-slip coefficient for Q690 HSS grit blasted and metalized faying surfaces connections were 0.50 and 0.60, respectively, and metalized faying surfaces specimens showed excellent slip resistant performance with high resistance and stable behavior; the loss of pretension at 100 h of metalized faying surfaces connections varied from 1.9% to 2.9%; the mean shape factors of Q690 HSS aluminum-based metalized surfaces connections with oversized holes, long slotted holes perpendicular and parallel to the loading direction were 0.98, 0.89 and 0.82, and the minimum shape factors were 0.93, 0.83 and 0.77, respectively, all higher than the specified values in current codes, and designs based on codes specified values got conservative results.
  • loading
  • [1]
    李国强, 王彦博, 陈素文, 等. 高强度结构钢研究现状及其在 抗震设防区应用问题[J]. 建筑结构学报, 2013, 34(1):1-13.
    [2]
    周燕, 雷宏刚, 李铁英. 摩擦型高强度螺栓抗剪连接研究进 展及评述[J]. 建筑结构, 2019, 49(14):62-68

    ,95.
    [3]
    王彦博, 陈坤, 李国强. 超500 MPa 级高强钢抛丸及抛丸后生 赤锈表面抗滑移系数试验研究[J]. 建筑结构学报, 2018, 39 (7):162-168.
    [4]
    Wang Y B, Wang Y Z, Chen K, et al. Slip factor of high strength steel with inorganic zinc-rich coating[J/OL]. Thin-Walled Structures, 2020, 148[2020-01-09]. https://www.sciencedirect.com/science/article/pii/S026382311931225X.
    [5]
    Cruz A, Simões R, Alves R. Slip factor in slip resistant joints with high strength steel[J]. Journal of Constructional Steel Research, 2012, 70:280-288.
    [6]
    陈玉峰. 高强度钢材焊缝及螺栓连接的受力性能和设计方法 研究[D]. 北京:清华大学, 2018.
    [7]
    Annan C D, Chiza A. Characterization of slip resistance of high strength bolted connections with zinc-based metallized faying surfaces[J]. Engineering Structures, 2013, 56:2187-2196.
    [8]
    Annan C D, Chiza A. Slip resistance of metalized-galvanized faying surfaces in steel bridge construction[J]. Journal of Constructional Steel Research, 2014, 95:211-219.
    [9]
    Kulak G L, Fisher J W, Struik J H A. Guide to design criteria for bolted and riveted joints[M]. Chicago:Research Council on Structural Connections, 2001.
    [10]
    彭铁红, 侯兆新, 文双玲,等. 螺栓孔径与孔型对高强度螺栓 摩擦型连接承载能力影响的试验[J]. 钢结构, 2007, 22(8):30-34.
    [11]
    中华人民共和国住房和城乡建设部. 钢结构高强度螺栓连接 技术规程:JGJ 82-2011[S]. 北京:中国建筑工业出版 社, 2011.
    [12]
    中华人民共和国国家质量监督检验检疫总局. 涂覆涂料前钢 材表面处理:表面清洁度的目视评定:GB/T 8923. 1-2011[S]. 北京:中国标准出版社, 2012.
    [13]
    中华人民共和国铁道部. 铁路钢桥保护涂装及涂料供货技术 条件:TB/T 1527-2011[S]. 北京:中国铁道出版社, 2011.
    [14]
    中华人民共和国国家质量监督检验检疫总局. 热喷涂 金属和 其他无机覆盖层 锌、铝及其合金:GB/T 9793-2012[S]. 北 京:中国标准出版社, 2012.
    [15]
    陈学森, 施刚, 陈玉峰. 高强钢螺栓连接电弧热喷铝接触面抗 滑移系数试验研究[J]. 建筑结构, 2021, 51(13):87-92.
    [16]
    中华人民共和国国家质量监督检验检疫总局. 金属材料 拉伸 试验 第1 部分:室温试验方法. GB/T 228. 1-2021[S]. 北 京:中国标准出版社, 2021.
    [17]
    中华人民共和国住房和城乡建设部. 钢结构工程施工质量验 收规范:GB 50205-2020[S]. 北京:中国标准出版社, 2020.
    [18]
    中华人民共和国国家质量监督检验检疫总局. 钢板栓接面抗 滑移系数的测定:GB/T 34478-2017[S]. 北京:中国标准出 版社, 2017.
    [19]
    中华人民共和国住房和城乡建设部. 高强钢结构设计标准:JGJ/T 483-2020[S]. 北京:中国建筑工业出版社, 2020.
    [20]
    余雷,吴典含,王辉,等. 不锈钢高强度螺栓连接预紧力松弛试 验研究[J/OL]. 工业建筑,2024,54[2024-05-15

    ]. http://kns.cnki.net/kcms/detail/11.2068.TU.20230413.1510.002.html.
    [21]
    Heistermann C. Behaviour of pretensioned bolts in friction connections:towards the use of higher strength steels in wind towers[D]. Accra:University of Ghana Business School, 2011.
    [22]
    Heistermann C, Veljkovic M, Simões R, et al. Design of slip resistant lap joints with long open slotted holes[J]. Journal of Constructional Steel Research, 2013, 82:223-233.
    [23]
    American Institute of Steel Construction. Specification for structural steel buildings:ANSI/AISC 360-16[S]. Chicago:AISC, 2016.
    [24]
    European Committee for Standardization. Eurocode 3:Design of steel structures:part 1-8:design of joints:EN1993-1-8[S]. Brussels:CEN,2005.
    [25]
    中华人民共和国住房和城乡建设部. 钢结构设计标准:GB 50017-2017[S]. 北京:中国建筑工业出版社, 2018.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (38) PDF downloads(5) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return