Volume 37 Issue 8
Oct.  2022
Turn off MathJax
Article Contents
Yegang You, Jian Li, Teng Wang, Lipeng Huang, Gang Gao. Review on the Axial Compression Performance of Double-Steel-Plate Composite Shear Wall[J]. STEEL CONSTRUCTION(Chinese & English), 2022, 37(8): 1-8. doi: 10.13206/j.gjgS21122004
Citation: Yegang You, Jian Li, Teng Wang, Lipeng Huang, Gang Gao. Review on the Axial Compression Performance of Double-Steel-Plate Composite Shear Wall[J]. STEEL CONSTRUCTION(Chinese & English), 2022, 37(8): 1-8. doi: 10.13206/j.gjgS21122004

Review on the Axial Compression Performance of Double-Steel-Plate Composite Shear Wall

doi: 10.13206/j.gjgS21122004
  • Received Date: 2021-12-20
    Available Online: 2022-10-28
  • Double-steel-plate composite shear wall, consisting of bilateral steel plates, in-filled concrete, and mechanical connectors between steel plates, has many advantages such as light weight, high compression, high ductility, thin wall, good seismic performance, and higher prefabrication rate. With the continuous improvement of building height and functional requirements, it has been widely used and developed.
    This paper summarized the research status of the axial compression performance of double-steel-plate composite shear wall and introduced several prevailing mechanical connector types including shear studs, binding bolts, hybrid connections, new mechanical connections, and so on. Then focusing on the axial compression performance, which is the basis of complex mechanical properties such as earthquake resistance and shear resistance, the change laws of axial compression bearing capacity and failure modes under the influences of different mechanical connector types and parameter variables were analyzed and summarized. The initial stiffness, limiting value of distance-to-thickness ratio(the ratio of connector distance to steel plate thickness), and calculation theory of axial compression capacity for double-steel-plate composite shear wall were also analyzed. Finally, this paper pointed out some problems in the current research from five aspects:theoretical studies, mechanical connectors, connecting joints, construction applications, and durability, and gave a prospect on the future development trend of double-steel-plate composite shear walls in high-rise buildings.
    Based on the analysis of current research status, it is concluded that:the buckling of steel plate is the key factor to determine the axial compressive bearing capacity of double-steel-plate composite shear wall, and according to the value of distance-to-thickness ratio, the failure modes of double-steel-plate composite shear wall are divided into two cases:the steel plate buckles before yielding, and the steel plate buckles after yielding. In engineering practice, it is required to avoid the failure mode in which the steel plate buckles before yielding by changing the distance-to-thickness ratio. Arranging a certain amount of mechanical connectors along the height and width of the wall specimen can make full use of the material properties of concrete, prevent the brittle failure caused by the steel plate buckling, improve the axial compression bearing capacity and ductility of the specimen, and ensure that the wall stiffness remains almost constant until failure.
  • loading
  • [1]
    中华人民共和国住房和城乡建设部.钢板剪力墙技术规程:JGJ/T 380-2015[S].北京:中国建筑工业出版社, 2015.
    [2]
    聂建国, 陶慕轩, 樊建生.双钢板-混凝土组合剪力墙研究新进展[J].建筑结构, 2011, 41(12):52-60.
    [3]
    祝文君, 马军, 黄会平, 等.双层钢板组合剪力墙在异型结构中的应用及研究[J].特种结构, 2010, 27(2):14-16.
    [4]
    丁朝辉, 江欢成, 曾菁, 等.双钢板-混凝土组合墙的大胆尝试:盐城电视塔结构设计[J].建筑结构, 2011, 41(12):87-91.
    [5]
    赵宏, 雷强, 侯胜利, 等.八柱巨型结构在广州东塔超限设计中的工程应用[J].建筑结构, 2012, 42(10):1-6.
    [6]
    Wright H D, Gallocher S C.The behavior of composite walling under construction and service loading[J].Journal of Constructional Steel Research, 1995, 35(3):257-273.
    [7]
    Takeuchi M, Narikawa M, Matsuo I, et al.Study on a concrete filled steel structure for nuclear power plants[J].Nuclear Engineering and Design, 1998, 179 (2):209-223.
    [8]
    Choi B J, Kim W B, Kang C K.Compressive performance with variation of yield strength and width-thickness ratio for steel plate-concrete wall structures[J].Steel and Composite Structures, 2013, 14(5):473-491.
    [9]
    张有佳, 李小军.钢板混凝土组合墙轴压受力性能有限元分析[J].工程力学, 2016, 33(8):84-92.
    [10]
    张有佳, 李小军, 贺秋梅, 等.钢板混凝土组合墙体局部稳定性轴压试验研究[J].土木工程学报, 2016, 49(1):62-68.
    [11]
    郝婷玥, 曹万林.双钢板混凝土组合剪力墙轴压承载力研究[J].工程科学学报, 2017(11):1765-1773.
    [12]
    Mydin M A O, Wang Y C.Structural performance of lightweight steel-foamed concrete-steel composite walling system under com-pression[J].Thin-Walled Structures, 2011, 49(1):66-76.
    [13]
    Liang Q Q, Uy B.Theoretical study on the post-local buckling of steel plates in concrete-filled box columns[J].Computers and Structures, 2000, 75(5):479-490.
    [14]
    Uy B, Bradford M A.Elastic local buckling of steel plates in composite steel-concrete members[J].Engineering Structures, 1996, 18(3):193-200.
    [15]
    Rafiei S, Hossain K M A, Lachemi M, et al.Profiled sandwich composite wall with high performance concrete subjected to monotonic shear[J].Journal of Constructional Steel Research, 2015, 107:124-136.
    [16]
    Rafiei S, Hossain K M A, Lachemi M, et al.Finite element modeling of double skin profiled composite shear wall system under in-plane loadings[J].Engineering Structures, 2013, 56(6):46-57.
    [17]
    李宇, 胡红松, 方膨膨, 等.双钢板-混凝土组合剪力墙中钢板局部稳定性能有限元分析[J].建筑结构学报, 2017, 38(增刊1):112-117.
    [18]
    安东.内嵌阻尼夹层双钢板混凝土组合剪力墙轴压性能研究[D].青岛:青岛理工大学, 2020.
    [19]
    闫晓京.核电工程双钢板内嵌混凝土组合墙轴压性能研究[D].北京:中国地震局工程力学研究所, 2013.
    [20]
    刘阳冰, 杨庆年, 刘晶波, 等.双钢板-混凝土剪力墙轴心受压性能试验研究[J].四川大学学报(工程科学版), 2016, 48(2):83-90.
    [21]
    刘阳冰, 王爽, 刘晶波, 等.双钢板-混凝土组合墙局部屈曲性能试验[J].河海大学学报(自然科学版), 2017(4):83-90.
    [22]
    韦芳芳, 郑泽军, 喻君, 等.基于钢板屈曲分析的双钢板组合剪力墙轴压承载力计算方法[J].工程力学, 2019(2):154-164.
    [23]
    Huang Z Y, Liew J Y R.Compressive resistance of steel-concrete-steel sandwich composite walls with J-hook connectors[J].Journal of Constructional Steel Research, 2016, 124:142-162.
    [24]
    黄真锋, 孙志雄, 张素梅, 等.闭口型压型钢板混凝土组合剪力墙轴压性能试验研究[J].建筑结构学报, 2019, 40(增刊1):84-90.
    [25]
    黄真锋, 张素梅, 郭兰慧, 等.双侧闭口型压型钢板混凝土组合构件轴压力学性能研究[J].钢结构(中英文), 2021, 36(4):11-19.
    [26]
    周雄亮, 舒赣平, 周观根, 等.桁架式多腔体钢板组合剪力墙短墙轴压性能试验研究[J].工业建筑, 2020, 50(3):1-7

    , 12.
    [27]
    何云飞, 舒赣平, 周观根, 等.桁架式多腔体钢板组合剪力墙轴压稳定性能研究[J].工业建筑, 2020, 50(3):8-12.
    [28]
    马华, 陈宇星, 李振宝, 等.哑铃型连接钢-混凝土-钢组合墙轴向抗压性能试验研究[J].建筑结构, 2021, 51(增刊1):1563-1568.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (247) PDF downloads(17) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return