Strength Reduction Factor of Framed Columns Supporting Leaning Columns
-
摘要: 介绍了对摇摆柱提供支持的框架柱的稳定性设计。存在摇摆柱的情况下,框架柱的稳定系数,除了采用放大了的长细比确定外,还要降低柱子曲线。在摇摆柱的轴力和框架柱的轴力相等的情况下,从b曲线下降到欧洲钢结构规范的c曲线。最后采用Jezek模型对上述结论进行了验证。Abstract: This paper investigated the stability coefficient of columns which provide lateral support to leaning columns. The present paper revealed that, the stability coefficient of framed columns should not only be determined by an amplified effective length, but also the column curve used should be lower, in the case of the leaning column carrying the same axial load as the framed column, the column curve should be changed from the curve b to the curve c in Eurocode 3. Using the well-known Jezek model, the above conclusions were verified.
-
Key words:
- column /
- leaning column /
- buckling /
- frame
-
[1] 中华人民共和国住房和城乡建设部.钢结构设计标准:GB 50017-2017[S].北京:中国建筑工业出版社,2018. [2] 童根树.钢结构的平面内稳定[M].北京:中国建筑工业出版社,2005. [3] European Committee for Standardization (CEN). Eurocode 3:design of steel structures-part 1-1:general rules and rules for buildings:EN 1993-1-1[S]. Brussels:CEN,2022. [4] Jezek K. Die festigkeit von druckstaeben aus stahl[M]. Vienna:Verlag von Julius Springer, 1937.
点击查看大图
计量
- 文章访问数: 100
- HTML全文浏览量: 9
- PDF下载量: 15
- 被引次数: 0