Formulae for Bearing Stress in Web of Crane Beam Under Wheel Load
-
摘要: 对于钢吊车梁轮压下腹板承压应力的计算,我国钢结构相关设计规范改过多次,其与欧洲、俄罗斯和美国的公式都不一样。简要介绍了基于弹性地基梁理论的一个解析解,其数值结果与有限元分析一致,同时给出了两类轨道的等效承压长度计算公式。Abstract: Equation for bearing stress in web of crane beam under wheel load has been varied several times in the Chinese code for design of steel structures, and they were different from the counterparts in the codes of European, Russian and the United States. This paper introduces a closed form solution whose numerical results are in good agreement with Finite Element analysis. Formulae for the equivalent bearing length of two types of rails are presented.
-
Key words:
- bearing stress /
- crane beam /
- beam on elastic plane
-
[1] 徐芝轮.弹性力学[M].北京:人民教育出版社,1982. [2] Biot M A.Bending of an infinite beam on an elastic foundation[J].Journal of Applied Mechanics,1937,4(3):1-7. [3] Tong G S,Xuan Z J.Revisiting the bearing stresses in webs of crane runway girders under wheel loads[J].Advances in Structural Engineering,2018,21(9):1792-1801. [4] Tong G S,Xuan Z J.Contact behavior between rail and elastic foundation[J].Meccanica,2022,57:1477-1489. [5] European Committee for Standardization.Design of steel structures-part 6:crane supporting structures:Eurocode 1993-6∶2007[S].Brussel:European Connittee for Standardization,2009. [6] 别列尼亚 Е.И..金属结构[M].颜景田,译.哈尔滨:哈尔滨工业大学出版社,1988. [7] 童根树.钢结构与钢-混凝土组合结构设计方法[M].北京:中国建筑工业出版社,2022. [8] 童根树.钢结构的平面外稳定[M].北京:中国建筑工业出版社,2013.
点击查看大图
计量
- 文章访问数: 190
- HTML全文浏览量: 53
- PDF下载量: 23
- 被引次数: 0